CL-CAN

CONTACTLESS - CAN SENSOR

Inventure Contactless CAN sensor ensures safe data reading from vehicle CAN bus without any disruption. This way any vehicle related warranty and safety issues can be avoided. The non-galvanic connection guarantees that no signal is sent back to vehicle CAN bus. Installation is easy and incorrect connection (swapping of CAN High and Low wires) is indicated on a LED.

The sensor can either be used together with Inventure FMS Gateway CAN bus interface or independently, with any GPS based vehicle tracking (AVL) systems.

Key features

➤  Signal sensing without galvanic (wire to wire) connection
➤  Reusable for next installation
➤  LED status feedback for easy installation
➤  High disturbance immunity, low error rate
➤  Low current consumption (typical 3 mA @ idle)
➤  Compatible with all AVL systems with CAN input
➤  Protected against
         ● wrong connection (of any kind)
         ● overvoltage transient
         ● overheating

With Inventure CL-CAN sensor you can:

➤  Avoid cutting or piercing CAN wires
➤  Replace many different vehicle-specific cables by a universal solution
➤  Connect to vehicle CAN bus at any accessible locations (not only at connectors)
➤  Transmit signal to a long distance (-1.5m by default and it can be extended to 20m or more)
➤  Install system easily and quickly.

Application areas

➤  Inventure contactless CAN sensor can be used
     ● Together with Inventure FMS Gateway
     ● Directly connected to any AVL devices

➤  Fuel management
➤  Vehicle dynamics
➤  ECO driving
➤  Signal converters (e.g. speed signal for taximeter)
➤  On-board display (e.g. vehicle weight display, FMS display)

Sensor Types

CL-CAN 7-32 V
Inventure CL-CAN sensor
7-32 V

Acquirement of vehicle related technical information requires connection to CAN bus. Intrusive methods are highly not recommended in order to keep CAN bus integrity and avoid any vehicle warranty issues. Inventure Automotive has developed a contactless listening adapter for safe data reading from CAN bus of the vehicle without creating direct, wire-to-wire connection.

During the development of Inventure Contactless CAN sensor it was very important that the contactless device is compatible not only with Inventure FMS Gateway CAN bus interface but with any independent telematics boxes. As follows Inventure offers safe connection and data reading to any System Integrators or Fleet Management service providers.

CL-CAN 3,3 5,0
Inventure CL-CAN sensor
3,3-5,0 V

The Inventure CL-CAN device is a contactless CAN bus reader, applying non-intrusive technology to acquire vehicle specific data. The usage of the device eliminates any vehicle warranty issue, since avoids galvanic connection to vehicle communication wires.

Inventure CL-CAN device can be useful for any aftermarket device that requires vehicle CAN data, such as:
➤  Automatic Vehicle Location system
➤  Fleet Management System
➤  Vehicle status display
➤  Fuel control
➤  And many more…

CL-J1708 sensor
Inventure CL-J1708 sensor

Most of the modern (personal and commercial) vehicles are equipped with communication system, such as J1708 system. The Inventure CL-J1708 device is designed for capturing vehicle data from such communication system.The Inventure CL-J1708 device is a contactless J1708 bus reader applying non-intrusive technology to acquire vehicle specific data. The usage of the device eliminates any vehicle warranty issue since avoids galvanic connection to vehicle communication wires. Inventure CL-J1708 device can be useful for any aftermarket device that requires vehicle J1708 data such as:
➤  Automatic Vehicle Locating system
➤  Fleet Management System
➤  Vehicle status display
➤  Fuel control
➤  And many more…

Contact us