We simplify the FMS Gateway testing for you
Sync your telematics box effortlessly with the Simulator firmware-powered FMS GW Compact, right from your desk.
Order just one trial product — the price includes everything you need
- Simulator firmware to easily sync your telematics box with the FMS Gateway Compact at your desk
- Programming cable to update the unit with the latest firmware, perfect for future reuse
- A detailed, vehicle-specific installation guide for a smooth setup
- Access to our dedicated technical support team
Seven simple steps for desktop testing
- Power the FMS Compact Gateway using a lab power supply or a 12-volt battery.
- Establish a connection between the FMS Compact Gateway and your AVL device using the CAN and/or RS232 input. If you want to use RS232 output, you can connect the FMS Compact Gateway to your computer using an adapter.
- Configure your AVL device by enabling the CAN Acknowledgement option, which on certain devices may be referred to as "CAN Normal mode," "CAN Active mode," or "CAN R/W mode."
- When using CAN output, the LED status indicators can help verify the correct configuration of the FMS Compact Gateway.
- The firmware's pre-installed simulator will commence transmitting data in half-minute cycles, simulating data as if it were originating from a vehicle.
- With the help of the simulator manual provided, you can easily identify the incoming parameters.
- If you receive data via RS232 input or require non-FMS standard data, we will supply you with the relevant protocol help manual.
- By following these steps, you will successfully obtain the requested data during your desktop testing.
Next Steps: Perfecting your in-vehicle testing
- Choose 3-4 vehicles available for testing.
- We offer recommendations based on our expertise to suggest which vehicles are optimal for testing purposes.
- Once the selected vehicle is finalized, we will provide you with three essential materials:
a. The firmware link specific to the chosen vehicle.
b. Instructions for installing the new firmware.
c. Installation instructions tailored to the selected vehicle, facilitating the connection of the CAN Sensor and FMS Gateway. - Replace the simulator firmware with the vehicle firmware during the installation process.
- Follow the installation guide to correctly install the contactless sensor on the CAN Bus cables of the vehicle.
- Power the FMS Gateway and connect it to both the CAN Bus reader and your AVL device.
- Successful connection establishment is indicated by the activation of green lights on both pf our devices.
Should you encounter any difficulties or have any questions during the process, our dedicated Inventure support engineers are available to provide assistance. Please feel free to reach out to us with any inquiries related to testing.